References

List of selected references.

2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 2007 | 2006 | 2003 | 2002

2021

• General revamp of BF6 – Skip collecting chute delivery
  TŘINECKÉ ŽELEZÁRNY, a.s.
  Turnkey delivery

• General revamp of BF6 – Coke hoppers delivery
  TŘINECKÉ ŽELEZÁRNY, a.s.
  Turnkey delivery

• General revamp of BF6 hearth – Salamander tapping
  TŘINECKÉ ŽELEZÁRNY, a.s.
  Turnkey delivery

• General revamp of BF6 hearth
  TŘINECKÉ ŽELEZÁRNY, a.s.
  Installation of new carbon block

• Roller table (ahead of disc shears)
  Huta Pokój Profile, Poland
  Supply

• New residental houses, Sviadnov
  FERRMON, spol. s r.o.
  Designer

• General revamp and modernization of existing wheel rolling line phase V. – Purching press installation
  BONATRANS GROUP a.s., Bohumín
  Basic and Detail design, As-built, Investor and technical Supervision

• Dedusting of griding machines
  Baumann Springs
  Detail Design, Turnkey delivery

• Foundry greening process in Metso Czech Republic foundry – stage 2
  METSO Czech Republic
  Turnkey delivery, Supervision

• KILPI – Reconstruction of the building
  Temex, spol. s r.o./PONATURE, s.r.o.
  Detail Design

2020

• General revamp BF6
  TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
  Detail design

• Rolling Table on Downcoilers
  Witkowitz Mechanica, a.s. / METINVEST HOLDING (Mariupol, Ukraine)
  Basic and Detail design, Production Documentation

• Basic construction workplace – hall reconstruction
  ŠKODA VAGONKA a.s.
  Documentation for building permission, Contractor selection and engineering

• Increase of heat treatment capacity – phase 3
  Metso Outotec Czech Republic s.r.o., Přerov (CZ)
  Basic and Detail design, Territorial permit, Engineering

• General revamp and modernization of existing wheel rolling line IV. phase – General revamp and modernization of Carousel furnace
  BONATRANS GROUP a.s., Bohumín (CZ)
  Basic and Detail design, As-built, Investor and technical Supervision

• Dental clinic Ostrava Svinov
  MDDr. Jiří Plevák (CZ)
  Basic and Detail design

• Olomouc, Hejčín military barracks – reconstruction of the kitchen and cafeteria (building No. 1)
  Česká republika – Ministerstvo obrany
  Basic and Detail design, As-built

• VK Vyškov – construction modifications of the kitchen block “800”
  Vojenská lázeňská a rekreační zařízení
  Basic and Detail design, As-built

• Foundry greening process in Metso Czech Republic foundry -stage 2.
  METSO Czech Republic
  Documentation of building permit, Detail Design

• Extension of production hall B
  ARCIMPEX s.r.o. (CZ)
  Supply

• Coiling drum and decoilling drum
  Joint Stock Company R&D Enterprise “MASHPROM”, Ekaterinburg, Russia
  Supply

• Formpiercing station in the foundry
  TATRA METALURGIE a.s. (CZ)
  Supply Formpiercing station in the foundry/pulley track / pneumatic distribution / electrical distribution
• Extension of production hall B
  ARCIMPEX s.r.o.(CZ)
  Detail design

2019

• General revamp and modernization of existing wheel rolling line II. and III. phase – Installation of bending press and rolling mill
  BONATRANS GROUP a.s., Bohumín (CZ)
  Basic and Detail design, Territorial permit, As-built, Investor and technical Supervision

• Replacement of mixer farrel by GK190E and TSE for new HF190
  Semperfex Optimit s.r.o., Odry (CZ)
  Basic and Detail design, Contract selection, As-built, Supervision

• Dedusting of pneumatic transport
  METSO Czech Republic
  Detail Design

• New Hot blast stovs forBF6
  TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
  General designer, Supply: Shell of HBS / Pipelines / Valves / Steel structures / Refractory lining

• Storage hall III
  ARCIMPEX s.r.o.(CZ)
  General designer, Supply

• Demolition of HBS 62
  TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
  Project documentation

• • Salamander tapping BF6
    PAUL WURTH (CZ)
    Project documentation
    • General revamp and modernization of existing wheel rolling line II and III phase – steel structures
      BONATRANS GROUP a.s.(CZ)
      Detail design
  • • Reconstruction BF6 – steel structures
      TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
      Detail design
  • • Steel structures along hot blast stoves
      TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
      Detail design

2018

• Modernisation and reconstruction of converter gas pipeline
  ENERGETIKA TŘINEC a.s. (CZ)
  Dokumentation of building permission, Detail Design, Workshop drawings, Supervision

• Optimalization of dedusting pipelines in the production hall of Valeo Žebrák
  Valeo a.s. (CZ)
  Study

• Settleable vessel for NCL No.3
  SYNTHESIA a.s. (CZ)
  Detail Design

• • • Construction of gas boiler house, Paper mill Olšany – construction part
      Vysoká škola báňská – Technická univerzita Ostrava, Výzkumné energetické centrum (CZ)
      Detail design

2017

• Firehouse (voluntary firefighter unit) Proskovice
  Statutární město Ostrava (CZ)
  Project

• • • Erection and commisioning of Straightening mach. on heavy section rolling mill
      VÍTKOVICE STEEL, a.s. (CZ)
      General Contractor
    • Exchange ofstraightenersTPT , 1. phase
      VÍTKOVICE STEEL, a.s. (CZ)
      Supply
    • Increase of heat treatment capacity
      Metso Czech Republic, s.r.o. (CZ)
      Study, Documentationforbuildingpermission, Detail design
    • General repairand Madernization TP6 – PS08 – Supplies
      ArcelorMittal Ostrava a.s. (CZ) / PRŮMYSLOVÉ MONTÁŽE, s.r.o. (CZ)
      As-builtdocumentatation
    • Mechanical descaling on winding drum of furnace coile
      ArcelorMittal Ostrava a.s. (CZ)
      Turnkeysupply
    • General revamp BF6
      TŘINECKÉ ŽELEZÁRNY, a.s.
      Study
    • Feed hopper discharge BF2
      U.S.Steel Košice, s.r.o. (CZ) / ARMATURY Group a.s.
      Workshop drawings
    • BF2, The salamander opening
      ArcelorMittal Ostrava a.s. (CZ) / PAUL WURTH, a.s.
      Detail design
    • Steel structure platform assessment (kneader replacement)
      Semperflex Optimit s r.o. (CZ)
      Detail design
    • Static calculation of the high pressure pipeline DN300
      INNOGY a.s. (CZ)
      Detail Design
    • High furnace gas supply from BF4 to Heating Plant E3
      TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
      Study

2016

• • • New Hot blast stove No 64
      TŘINECKÉ ŽELEZÁRNY, a.s.
      General designer, Supply of Shell, Pipelines, Steel structures
    • Pusher-type furnace
      VÍTKOVICE STEEL, a. s.
      Turnkeysupply, General Designer
    • Replacement of UDZWGT wire drawing machneson TPD plan
      ArcelorMittal Ostrava a.s. (CZ)
      General Designer
    • Quenching device for tubes
      Válcovna trub Ostrava-Vítkovice – Třinecké železárny a.s. (CZ)
      Designing, Engineering, Technical support
    • Water treatment for quenching device
      Válcovna trub Ostrava-Vítkovice – Třinecké železárny a.s. (CZ)
      Designing, Engineering, Technical support
    • Supply of manipulation magnet to overhead crane
      ArcelorMittal Ostrava a.s. (CZ)
      Turn key supply
    • General repair of shears on Steckel Mill
      ArcelorMittal Ostrava a.s. (CZ)
      Turn key supply
    • Installation and renovation of used (second hand) slitting line
      ArcelorMittal Technotron s.r.o. (CZ) – Lískovec
      Designing, Engineering, Technicalsuppor

2015

• • • Sinterplant North, Spike roll crusher
      ArcelorMittal Ostrava a.s. (CZ)
      Detail design
    • Brass Processing Plant
      Wah Cantt, Pákistán
      General Designer
    • Brass Processing plant
      Helwan, Egypt / Vítkovice Mechanika a.s. Scope
      General Designer
    • Sinterplant North, New sintercars
      ArcelorMittal Ostrava a.s. (CZ)
      Detail design
    • Reduction of fugitive emissions from manipulation and cooling in Sintering plant South
      ArcelorMittal Ostrava a.s. (CZ)
      General designer, Supply of Screens, Conveyor belts, Steel structures, Concrete structures

2014

• • • Static analysis of steel structure BF4
      TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
      Detail design

2013

• • • Revamp of dedusting system Cast houses BF4 and BF6
      TŘINECKÉ ŽELEZÁRNY, a.s. (CZ)
      Detail design

2012

• • • Revamp of Gas cleaning plant of BF2
      U. S. Steel Košice s.r.o. (SK)
      Detail design
    • General revamping,modernisationof Tube Mill Chomutov
      Válcovny trub Chomutov / Železárny Veselí, a.s. – divize Válcovny trub Chomutov
      Feasibility study

2011

• • • Safety crossing and rails
      Ferona a.s. – Steel Service Centrum Ostrava (CZ)
      Turn key supply
    • Slitting Line
      Ferona a.s. – Steel Service Centrum Ostrava (CZ)
      Turn key supply
    • Slitting Line
      Ferona a.s. – Steel Service Centrum Ostrava (CZ)
      Turn key supply

2010

• • • Connection of hot blast stove BF1 and BF2
      ArcelorMittal Ostrava a.s. (CZ)
      Turnkey supply
    • Thermalflattening and coating line for transformer stips
      Válcovna za studena, Ostrava, Czech Republic / VzS Nová Huť Ostrava (ArcelorMittal Frýdek-Místek, a.s.)
      General designer

2009

• • • Nitrobenzen cleaner
      MCHZ Ostrava (CZ)
      Workshop drawings
    • De-coiler and loading trolley on Transversal Slitting Line
      Ferona a.s. – Steel Service Centrum Ostrava (CZ)
      Turn key supply
    • Cooling system of rolls on 4-Hi rolling mill
      ArcelorMittal Frýdek-Místek, Czech Republic / VzS Nová Huť Ostrava, spol. s r.o. (ArcelorMittal Frýdek-Místek, a.s.)
      Turnkey supply
    • Slitting line
      Válcovna za studena, Ostrava, Czech Republic / VzS Nová Huť Ostrava (ArcelorMittal Frýdek-Místek, a.s.)
      Turnkey supply

2008

• • • Installation of patented brass-plating on the thermodiffusion line
      ŽDB GROUP a.s. (CZ)
      Designing, Engineering, Project management
    • Reconstruction and modernization of production facilities -Milling Machine
      Měď Povrly a.s. (CZ)
      Designing, Engineering, Technical support
    • Reconstruction and modernization of production facilities -Pickling Line
      Měď Povrly a.s. (CZ)
      Designing, Engineering, Technical support
    • Reconstruction and modernization of production facilities – Casting equipment
      Měď Povrly a.s. (CZ)
      Manufacturing documentation
    • Reconstruction and modernization of production facilities – Exhausting Equipment for Chips
      Měď Povrly a.s. (CZ)
      Designing, Engineering, Technical support
    • Equipment for the controlled cooling of reinforcing rods
      ArcelorMittal Ostrava a.s. (CZ)
      Turnkey supply
    • Reconstruction and modernization of production facilities -input and output section of 2-Hi Rolling Mill
      Měď Povrly a.s. (CZ)
      Designing, Engineering, Technical support, Supply of equipment
    • Revamp of Hot blast stove No11
      U. S. Steel Košice s.r.o. (SK)
      Detail design
    • General revamp of BF1
      U. S. Steel Košice s.r.o. (SK)
      Detail design of cooling system
    • Slitting Line and Packing Line in KWW
      KWW a.s., Králův Dvůr, Czech Republic (CZ), (Bilstein Group)
      Designing, Engineering, Technical support

2007

• • • General revamp of BF2
      U. S. Steel Serbia (SRB)
      Detail design of cooling system
    • Reconstruction of descaling system
      ArcelorMittal Ostrava a.s. (CZ)
      Turnkey supply

2006

• • • General revamp BF3
      ArcelorMittal Ostrava a.s. (CZ)
      General designer, Supply of Cast house runners, Steel structures of Cast house, Carbon blocks of hearth.

2003

• • • Hot blaststove No 11, tilt correction
      ArcelorMittal Ostrava a.s. (CZ)
      Detail design
    • MINIMILL – P1500 -realization of Rolling Mill construction
      ArcelorMittal Ostrava a.s. (CZ)
      General Designer

2002

• • MINIMILL -P1500 – Equipment for asssembly of bearing and bearing body of working rolls
    ArcelorMittal Ostrava a.s. (CZ)
    Turnkey supply
  • MINIMILL -P1500 -Cross-suttingshears after laminar cooling
    ArcelorMittal Ostrava a.s. (CZ)
    Turnkey supply
  • MINIMILL – P1500 – Primary and secondary descaling
    ArcelorMittal Ostrava a.s. (CZ)
    Turnkey supply